CL20基含铝炸药驱动金属加速能力试验研究

Experimental Research on Driving Metal Acceleration Capability of CL20-Based Aluminized Explosives

  • 摘要: 研究新型CL20基含铝炸药驱动金属加速能力. 选用TNT、JH-16以及CL20基含铝炸药进行Φ50 mm标准圆筒试验,获得3种炸药加载条件下圆筒壁膨胀过程以及最大膨胀速度,分析给出3种炸药的Gurney系数. 结果表明:相同条件下,JH-16和CL20基含铝炸药与TNT相比,破片初速高23.0%和36.3%,Gurney系数分别高20.2%和24.5%.

     

    Abstract: The driving capability of new CL20-based aluminized explosives was researched. TNT, JH-16 and the CL20-based aluminized explosives were used in the Φ50 mm standard cylinder test, and the scanning photos of the expansion process of cylindrical wall were obtained. By fitting data the maximum expansion speed of the cylindrical wall was gained under the three kinds of explosives loading conditions, and then the Gurney coefficient of three kinds of explosives was calculated. The results show that: when the explosive is JH-16 and CL20-based aluminized explosives, the muzzle velocity of fragments are respectively 23.0% and 36.3% higher than TNT, and the Gurney coefficients also are respectively 20.2% and 24.5% higher.

     

/

返回文章
返回