“欢迎访问北京理工大学学报自然科学中文版网站!”
加入收藏 | 地图 | 联系方式      
冯顺山,王宇,芮久后.最大熵原理在钝感熔铸炸药配方设计中的应用[J].北京理工大学学报(自然科学版),2011,(11):1261~1264.
FENG Shun-shan,WANG Yu,RUI Jiu-hou.Application Research of Maximum Entropy Theory in Insensitive Melting-Cast Explosive Formulation[J].Transactions of Beijing Institute of Technology,2011,(11):1261-1264.
本文二维码信息
二维码(扫一下试试看!)
最大熵原理在钝感熔铸炸药配方设计中的应用
Application Research of Maximum Entropy Theory in Insensitive Melting-Cast Explosive Formulation
投稿时间:2011-01-06  
DOI:
中文关键词:  最大熵原理  钝感熔铸炸药  能量  感度
English Keywords:maximum entropy theory  insensitive melting-cast explosive  energy  sensitivity
基金项目:
作者单位E-mail
冯顺山 北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081 ssfeng@bit.edu.cn 
王宇 北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081  
芮久后 北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081  
摘要点击次数: 17659
全文下载次数: 307
中文摘要:
      针对含HMX或RDX的熔铸炸药降低冲击感度、提高使用安全性的需要,以最大熵为评价准则提出了钝感熔铸炸药的配方设计方法,并以此方法获得了能量和安全性俱佳的钝感熔铸炸药配方. 选取NQ/HMX/TNT-36.1/33.9/30.0和NQ/RDX/TNT-34.5/25.5/40.0配方制备熔铸装药试样并进行爆速和枪击感度测试,结果显示两试样分别相对Octol 70/30和Cyclotol 60/40爆速仅降低2%~4%,但枪击感度大幅度降低,说明两试样在能量损失较小的情况下安全性大幅度提高,使能量和安全性俱佳,证明了本配方设计方法的可行性.
English Summary:
      To meet the needs of reducing the impact sensitivity and improving the safety of melting-cast explosives containing HMX or RDX, created a formulation design method of insensitive explosive based on the rule of maximum entropy. With this method, insensitive explosive formulations that are powerful and safe could be achieved. Choose the explosive formulations of NQ/HMX/TNT-36.1/33.9/30.0 and NQ/RDX/TNT-34.5/25.5/40.0 to make two experimental samples, and tested these samples' detonation velocity and rifle shooting sensitivity. Experimental results show that, the detonation velocity only reduces 2% to 4% but it is much more insensitive in rifle shooting experiment, compared with Octol 70/30 and Cyclotol 60/40. It means that these two samples become much safer with a little energy reduce, that proves the formulation design method which created in this article is feasible.
查看全文  查看/发表评论  下载PDF阅读器

您是第18045644位访问者  今日共有 1923访问者
版权所有:北京理工大学学术期刊办公室
主管单位:中华人民共和国工业和信息化部 主办单位:北京理工大学 地址:北京海淀区中关村南大街5号
技术支持:北京勤云科技发展有限公司